Open End Rack Hanger Rods

Unlike S hooks which hang at a slant, our hanger rods have compound curves and hang straight. These rods were designed to be used with the HD30B, HD40B, HD48, GA18RT, GA27RT and all commercial racks with a COM prefix.

If you have ceilings 9 feet or over you may want to consider our rack hanger rods. Quick links are not necessary to fasten hanger rods to your rack or your ceiling.

Hanger rod sizes...
8 1/2" - 12" - 15 1/2" - 20" - 24" - 27 1/2 and 30" drop.
See recommended lengths below.

1/4 Solid stainless steel rack hanger rods:

• For a drop of less than 8 1/2", look at our 3 1/2" and 5 1/2 " S-Hooks.
• For a drop of over 30", you could use a combination of lengths.

Recommended hanger rod lengths for people from 5' 4" to 5' 10" tall. If you are under 5' 3", you might want to move up one length and if you are over 6', you might want to move down one length. It would not hurt to take some measurements.

• For the HD30B, HD40B, HD48B, GA18RT and GA27RT
  • 9 foot ceiling -- 12"
  • 10 foot ceiling - 24"
  • NOTE: You will need 3 hangers for the HD48B and 2 for all the rest above.
• For the Commercial Series: (with a COM prefix)
  • 9 foot ceiling -- 15 1/2"
  • 10 foot ceiling - 27 1/2"
  • NOTE: You will need 4 hangers for all commercial racks above.

PAGE UPDATED - 9.09.04