Wall mount pot racks in stainless

WL 36
12 pot hooks - shown with optional 10" x 34" S/S grid installed
Scroll down page for mounting information & tips

• Measurements:
• Width - 36 1/4 inches
• Depth - 11 inches
• Height of rack 10 inches
• Distance from top of rack to bottom of hooks - 14 inches

FEATURES:
These pot racks are designed to span 3 or 4 wall studs on 16 inch centers.
The grid can be used for pot lids or you could order extra hooks and hang utensils.
Like our hanging units, we punch holes in the bands to accept the solid stainless steel pot hooks so they do not scratch and wear the surface of the bands.

These racks come with cross braces whether you order it with or without grid. If you purchased this rack without the grid, you could install your own shelving board.

WL52 G
16 pot hooks - optional grid installed

• Measurements:
• Width - 52 1/4 inches
• Depth - 11 inches
• Height of rack 10 inches
• Distance from top of rack to bottom of hooks - 14 inches

Mounting suggestions and tips:

• The three 1/4 x 1 inch bolts that are holding the top back bar to rack should be removed and discarded. This top back bar will be held in place with your wall mounting bolts when you mount rack to wall.
  The rack was designed this way to lessen the exposed fasteners on back and give it a cleaner symmetrical look.
• While this top bar is off you could use it as a template. Suggest to your builder that 6 lag bolts (1/4 inch diameter) will be needed to mount rack to wall and that two lag bolts should be used in each of the three wall studs.